The advantages of LMTK balanced flowmeter:

● High measurement accuracy

The uncertainty of the outflow coefficient in instrument design is ± 0.5%

DN15~500 instrument calibration before leaving the factory

Commissioned third-party calibration for DN500 and above

Low requirements for straight pipe sections

The optimal configuration is 5D in the front and 5D in the back

Normal configuration with 2D before and 2D after

0.5D before and 0.5D after the minimum configuration

Low permanent pressure loss

The maximum permanent pressure loss is about 1/3 to 1/4 of the maximum differential pressure, with low flow noise and fast pressure recovery.

● Wide range ratio

The normal range ratio for use is 10:1

The maximum usage range ratio is 15~25:1

Note: The maximum usage depends on the working conditions and the differential pressure gauge used in conjunction

Good repeatability and long-term stability

Instrument repeatability ≤ 0.1%

Right angle and through-hole design, wear-resistant

The flow field distribution is uniform, and the deviation of the outflow coefficient is small after long-term use

● Resistant to dirt and easy to block

Reduced the formation of eddy currents and dead zones, allowing dirty media to pass through the throttle hole,

Reduce the impact of the accumulation of dirty media on flow measurement

● Wide applicability

The β value can be selected from 0.25 to 0.90

Reynolds number 200-107

Size DN15-3000

Almost all working conditions

Low temperature fluids and liquid gases

Can directly measure bidirectional flow

● Can be used for bidirectional measurement

The throttling element is designed as a symmetrical structure with flat, plate, and straight through holes, and the pressure tapping hole is located at the flange pressure tapping position. With the corresponding differential pressure gauge, it can achieve bidirectional flow measurement with one flowmeter without changing the installation method.

● Easy to install, use, and maintain

The LMTK balanced flowmeter is a differential pressure flowmeter, and its installation, use, and maintenance are completely consistent with standard throttling devices (orifice plate, nozzle, and Venturi).

● Powerful selection calculation software and physical property database

The perfect combination of ISO5167 flow equation and powerful physical property database.

The software's built-in physical property database contains over 1700 types of media, covering almost all measurable media in the chemical industry.