Product Features

The parts that are easy to carry, not prone to leakage, and easy to maintain in contact with the medium are all made of structural ceramic materials, which have high chemical stability and hardness. Therefore, this valve has high wear resistance, corrosion resistance, and erosion resistance, as well as good insulation and low thermal expansion;

After precise and wide range fine-tuning of the ball and valve seat, good sealing performance can be achieved by utilizing the self lubrication of Zr02 ceramic;

The simple structure and labor-saving operation (far more labor-saving than hand clamp pressure pumps) have changed the disadvantages of metal hard sealed ball valves, such as easy leakage, high torque, and non corrosion resistance of sealing surfaces;

The excellent wear resistance of ceramic allows this valve to be used for a long time;

U is used in high hardness granular media, or media with soft particles but corrosion;

Easy to operate, fast opening and closing, only need to rotate 90 ° from fully open to fully closed, making it convenient for remote control;

Easy maintenance, simple ball valve structure, and generally movable sealing rings make disassembly and replacement relatively convenient;

U is widely applicable, with diameters ranging from a few millimeters to several meters, and can be used for applications ranging from high vacuum to high pressure.

Installation method

Remove the protective covers on both sides of the flange end and rinse and clean with the valve open;

Before installation, the entire machine should be tested according to the specified signal (electric or pneumatic) to prevent vibration from affecting performance during transportation. Only after passing the test can it be installed online (wiring should follow the electric actuator circuit diagram);

Before connecting to the pipeline, it is necessary to flush and remove any remaining impurities in the pipeline (which may damage the valve seat and ball);

During installation, please do not use the actuator part of the valve as a lifting point to avoid damaging the actuator and accessories;

This type of valve should be installed in the horizontal or vertical direction of the pipeline;

The pipeline near the installation point should not have any low hanging or external force bearing phenomenon, and pipeline supports or supports can be used to eliminate the deviation of the pipeline;

After connecting with the pipeline, please cross tighten the flange connection bolts with the specified torque.