Product specifications

Pressure Range Selection Table

Remarks：

① ▲ in the above table represents sealing gauge pressure。  

② Absolute pressure The table only provides a 0.05 level.

The range is negative: (measurement lower limit~0), the value range of the measurement lower limit is -100~0, and the unit is kPa; Composite range: (measurement lower limit~measurement upper limit), measurement lower limit value range: -100~0, unit: kPa; Measurement upper limit value rangeSurrounded by：0~100kPa~250MPa。

Classification of Instrument Types: Basic Type and Intrinsic Safety Type;

Pressure Unit：Pa、kPa、、MPa 、mmH₂O、mmHg、bar、mbar、kgf（kgf/cm2）、psi There are a total of 9 types；

Display：LCD white backlight, optional digital display (4-digit, 5-digit, 6-digit);

Pressure overload: When the pressure measurement value exceeds 120% FS, the entire screen flashes an alarm;

Measurement speed: Users can set the measurement speed, which defaults to 3 times/s at the factory;

Working time: It can work continuously for about 1000 hours at a speed of 3 times per second, and can work for up to 10000 hours at a speed of 2 times per second. If the battery level is too low, the LMTK212 power will automatically shut down;

Operating environment temperature: -10 ℃ to 50 ℃;

Compensation temperature: 0 ℃ to 50 ℃ (ensuring accuracy);

Storage temperature:-20℃〜70℃；

Power Supply：Powered by three AA batteries or a dedicated 12VDC adapter; Intrinsic safety batteries must use the specified model, refer to the attachment.

Communication interface: RS232， Baud rate 9600; Data length of 8 bits, stop bit of 1 bit;

Size: Header diameter of Φ 95mm × 37mm, total height of 132mm;

Weight：0.45kg；

Pressure connection: M20 × 1.5mm or customized;

Peak recording: Record the maximum and minimum pressure values that occur during the pressure measurement process.